Fibreglass Pool Ideas Havelock North
Fibreglass pool ideas for Havelock North — one-piece shells, built in New Zealand.
A Bayside fibreglass pool is made in one piece in Whakatāne and installed on site by our licensed local installer — Think Water for Napier, Hastings, Waipukurau and the wider region. Here is the short version of what that means for a Havelock North section.
At a glance
Sizes are quoted as internal, water-line measurements — an 8 x 4 is 8 x 4 of water. Depth is the shell height, and capacity is measured to the top of the shell.
The photo up top
What to look at in a pool photo
That is a finished Bayside pool, and it is the best way we can show you what one looks like in a yard — it is not a photo of a section in Havelock North. Look at how much room the pool takes out of the space around it, where the water line sits when you look out from the house, and what the yard looks like once the paving and planting are done. For an in-ground fibreglass pool in Havelock North, those three decide it.
- The real size of the thing A pool looks smaller on paper than it does in a section. Use the picture to judge the length you want against the space you have — the difference between a 6.5 m and a 9 m swimming pool is obvious in a photograph and invisible in a spec sheet.
- One piece of water Every Bayside shell is moulded as a single piece before it leaves Whakatāne, so the pool arrives complete and the water line is continuous. Nothing is built up on site out of panels or a liner.
- The finishing decisions The pool is the start of the job, not the end of it. Fencing, paving or decking, and the planting around it, are what you notice in a picture of a finished yard — and they are worth deciding while the section is still open ground.
Want to see one in the ground rather than a photo of one? Think Water installs right across Hawke’s Bay — give them a call and ask. Every shell they set was moulded in our own factory first.
For a Havelock North section
How to choose a swimming pool for a Havelock North section
There is no such thing as the best pool in the abstract. There is the pool that suits your Havelock North section, and it comes down to space, use, access and what you want around it.
Space on the section
Get a tape on the site before you pick a pool. The pool footprint plus the surround plus somewhere to walk is the number that matters, and it always beats the picture in your head.
How you will use it
How the pool gets used decides its length and its depth. Laps want length; a plunge pool wants to be simple and cheap to run; a family pool generally wants both shallow and deep ends.
Getting it in
Access is the question that decides most installs. Machines need a clear run to the hole, or the shell goes over the house by crane — worth checking before you set your heart on a position.
Around the pool
Paving, decking, fencing and planting are what make it look finished. We can price the pool and the surrounds together so there are no surprises.
One thing, three names
In-ground (or inground) pool, or fibreglass pool? The Havelock North answer
If you are searching Havelock North for an in-ground pool, a swimming pool or a fibreglass pool, you are usually looking at the same job. The names overlap, but they do not mean identical things.
In-ground pool
A pool set into the ground rather than standing above it. Every Bayside shell is designed to go in the ground, so an in-ground pool is the normal case rather than an upgrade. Where digging is not wanted, there is also a Freestanding option in the range — still a Bayside shell, sitting above ground.
Fibreglass pool
Fibreglass means the pool body is a one-piece moulded shell, made in our Whakatāne factory and delivered complete. On site the work is preparing the base, placing and setting the shell, then everything around it — rather than building the pool body itself on site.
Swimming pool
The widest of the three, and the one people type most. It covers a small plunge pool through to a 12 m family and lap pool — the difference being length, depth and how much of the section they take up.
On the numbers: the size you are quoted is the water-line size, not the outside of the shell. An 8 x 4 pool gives you 8 x 4 of water. Depth is the height of the shell, and volume is measured to the top of the shell. That is true of every inground pool we build, whatever spelling you searched.
What fits
What pool size works in Havelock North
Ten fibreglass swimming pool models cover it. At the small end: the 3.6 x 2.2 m Tranquil and the 4 x 2.4 m Pause. Mid-range: the 5.45 x 3.4 m Element, the 6.5 x 3 m Retreat and the 7 x 3.5 m Cove. Larger: the 8 x 4 m Satin, the 9 x 4.4 m Shoreline, the 10 x 4.4 m Coastline and the 12 x 4.4 m Big Bertha. Every one is moulded in Whakatāne. Sizes are quoted as internal water-line dimensions, so an 8 x 4 really is 8 x 4 of water, depth is the shell height, and capacity is measured to the top of the shell.
The sequence
What actually happens, from quote to first swim
What people want from a pool company is a straight answer about what happens when. Here it is.
- Site assessment — your section is looked at before anything is dug: where the pool can go, how the machines reach the hole, where the shell can be placed.
- Design and quote — the model and size that fit, and a written price. Get the quote in writing and itemised, so you can see exactly what you are paying for.
- Manufacture — the shell is moulded in Whakatāne, in New Zealand, under our own roof.
- Excavation and base — the hole is dug, the base is prepared properly, and the shell is set by the same team that quoted the job.
- Fill and commission — water goes in, the filtration and pump are commissioned, and the pool is running.
- Handover — you get the pool handbook, which sets out how to look after the shell.
The fast part is the dig and the shell going in. The slow part is the water, the surrounds and the fence — plan for that, not for the dig.
Looking after it
What ownership looks like the year after
On handover day we walk you through the whole pool — the equipment, the water and what the first week looks like — so it is familiar before we leave. After that the main job is the water: keep the chemistry in range and the surface and the equipment both stay happy.
Read the pool warranty Pool maintenance tips Landscaping around a pool
The rest of the region
Pool ideas for the rest of Hawke’s Bay
One team looks after this region: Think Water, covering Napier, Hastings, Waipukurau and the wider region. These are the other areas with their own pool ideas pages.
Questions
Havelock North pool questions, answered
How much does a fibreglass pool cost in Havelock North?
It depends on the model, the size, how easily the shell reaches your section, and what you put around the pool — those four things move the number more than anything else. We do not quote a figure without seeing the site, because a wrong number wastes your time and ours. The pool cost guide carries the bands our own written quotes run across; your installer writes the actual price for your section. Send us your section and you will get a written quote for it.
What size fibreglass pool should I get in Havelock North?
That is a question about your section, not about Havelock North in general — the clear space is what decides it. The fibreglass swimming pool range starts at the 3.6 x 2.2 m Tranquil plunge pool and runs to the 12 x 4.4 m Big Bertha, with ten models in between. A tight section usually ends up at a plunge or compact model; a section with room usually takes a 7 to 8 metre family pool. Worth remembering that our sizes are internal, water-line measurements, so an 8 x 4 pool gives you 8 x 4 of water, and the shell needs a little more space than that.
What consents does a pool need in Havelock North?
Pool fencing is the part that is not optional. It has to comply with the building code, and it is checked — that applies to any pool in Havelock North, whether the pool itself needed a consent or not. Depending on the section, a resource or building consent may also come into it. We work through that as part of the job rather than leaving you to work it out, and the fencing sits outside the pool price, so ask for it to be shown on the quote.
How long does a pool installation take?
The excavation and the shell placement are the quick part — usually a few days once the team is on site. What takes the time is what comes after: filling, surrounds, fencing and getting the water balanced. You get a realistic sequence up front rather than just the fast part, so you can plan the garden and the fencing around it.
Which Bayside model should I look at first?
It follows the sections rather than the postcode. Where space is tight, the plunge and compact models win — the Tranquil, the Pause and the Element. Where there is room, a 7 to 8 metre family pool is the usual pick, which is the Retreat, the Cove or the Satin. The whole range with its dimensions is on the pool range page if you want to see the sizes side by side before you ring anyone.
Are you actually a Havelock North pool builder, or do you travel in?
We manufacture, and a licensed local pool builder and installer puts the pool in. For this region that is Think Water, covering Napier, Hastings, Waipukurau and the wider region. Every Bayside shell is moulded in our Whakatāne factory and installed on site by the installer who covers your area, and the person who quotes your job is the person on your site when it goes in.
Can a fibreglass pool go above ground?
Yes — a Bayside shell is designed to be set into the ground, so an in-ground pool is the standard case rather than a special order. The range also includes a Freestanding option for a section where digging is not wanted; it is the same shell family, sitting above ground.
What is different about a fibreglass pool?
The shell arrives as one finished piece rather than being built up on site, so the on-site work is preparing the base, placing and setting it, and everything around the water. That is also why the surface matters so much: ours is ChlorShield, the gelcoat system on every Bayside shell, and the ChlorShield page sets out what it is built to do. We will talk about any pool type with you — we just sell the one we manufacture.
How do I choose a pool colour?
Get the colour right before the shell is ordered, not after. The pool colours page shows the palette on real pools, and you can ask to see a colour in person — the light a pool sits in changes how a colour reads.
Thinking about a pool in Havelock North?
Send us your section and we will come back with the fibreglass pool models, sizes and options that suit it — and the installer who covers Havelock North.