Fibreglass Pool Ideas Lincoln
Fibreglass swimming pools for Lincoln, and what to weigh up before you dig.
Bayside Pools builds fibreglass swimming pools in Whakatāne and installs them nationwide through licensed local installers — for Lincoln that is Tom O’Connell and Zach, covering Christchurch and the wider Canterbury region. Everything below is what a Lincoln pool buyer actually needs to decide.
At a glance
Sizes are quoted as internal, water-line measurements — an 8 x 4 is 8 x 4 of water. Depth is the shell height, and capacity is measured to the top of the shell.
The photo up top
What to look at in a pool photo
That is a finished Bayside pool, and it is the best way we can show you what one looks like in a yard — it is not a photo of a section in Lincoln. Look at how much room the pool takes out of the space around it, where the water line sits when you look out from the house, and what the yard looks like once the paving and planting are done. For an in-ground fibreglass pool in Lincoln, those three decide it.
- The real size of the thing A pool looks smaller on paper than it does in a section. Use the picture to judge the length you want against the space you have — the difference between a 6.5 m and a 9 m swimming pool is obvious in a photograph and invisible in a spec sheet.
- One piece of water Every Bayside shell is moulded as a single piece before it leaves Whakatāne, so the pool arrives complete and the water line is continuous. Nothing is built up on site out of panels or a liner.
- The finishing decisions The pool is the start of the job, not the end of it. Fencing, paving or decking, and the planting around it, are what you notice in a picture of a finished yard — and they are worth deciding while the section is still open ground.
Want to see one in the ground rather than a photo of one? Tom O’Connell and Zach installs right across Christchurch — give them a call and ask. Every shell they set was moulded in our own factory first.
What suits Lincoln
Choosing a fibreglass pool for Lincoln
Most pools are bought twice: once on the idea, and once on the numbers. Getting the four things below settled in that order is what keeps a Lincoln pool project simple.
Space on the section
Work to the space you have, not the pool you saw online. A pool that fits the section cleanly is worth more than a bigger one that crowds it.
How you will use it
How the pool gets used decides its length and its depth. Laps want length; a plunge pool wants to be simple and cheap to run; a family pool generally wants both shallow and deep ends.
Getting it in
The base is prepared and the shell is set by the same team that quoted the job — so access gets worked out up front, not left to whoever turns up.
Around the pool
Fencing is the part that is not optional, and it has to comply. Everything else around the water — paving, decking, planting — is a choice, and it is what the pool ends up looking like.
One thing, three names
Swimming pool, in-ground pool, fibreglass pool — what is the difference?
People search for all three — in-ground pool, inground pool, swimming pool — and for a Bayside pool they mostly describe the same purchase. Here is the plain version.
In-ground pool
A pool set into the ground rather than standing above it. Every Bayside shell is designed to go in the ground, so an in-ground pool is the normal case rather than an upgrade. Where digging is not wanted, there is also a Freestanding option in the range — still a Bayside shell, sitting above ground.
Fibreglass pool
Fibreglass means the pool body is a one-piece moulded shell, made in our Whakatāne factory and delivered complete. On site the work is preparing the base, placing and setting the shell, then everything around it — rather than building the pool body itself on site.
Swimming pool
The widest of the three, and the one people type most. It covers a small plunge pool through to a 12 m family and lap pool — the difference being length, depth and how much of the section they take up.
One thing worth knowing about the sizes: the dimensions we sell are internal, water-line measurements — an 8 x 4 is 8 x 4 of water. Depth is the shell height, and capacity is measured to the top of the shell. Whether you type inground pool or in-ground pool, this is the pool that goes in the ground.
What fits
What pool size works in Lincoln
The fibreglass swimming pool range runs from the 3.6 x 2.2 m Tranquil and the 4 x 2.4 m Pause — plunge pools that fit a courtyard — through the 5.45 x 3.4 m Element, the 6.5 x 3 m Retreat and the 7 x 3.5 m Cove, and up to the 8 x 4 m Satin, the 9 x 4.4 m Shoreline, the 10 x 4.4 m Coastline and the 12 x 4.4 m Big Bertha. Ten models, one shell family, all built in Whakatāne. The sizes we sell are internal, water-line measurements — an 8 x 4 is 8 x 4 — so what you are quoted is what you get to swim in.
The sequence
What actually happens, from quote to first swim
No two sites are the same, but the order is. This is the shape of a Bayside fibreglass pool install.
- Site visit — assess the section, the access and the position. This is the step that prevents surprises later.
- Design and price — the model suited to the section, with a written quote you can read line by line.
- Manufacture in Whakatāne — one-piece fibreglass shell, built here rather than imported complete.
- Excavate and prepare the base — the part that is invisible afterwards, and the part that matters most.
- Set the shell and backfill — placed, levelled and set in.
- Fill, commission, hand over — the pool running, and the handbook with it.
Excavation and shell placement are quick. What takes the time is everything after: filling, surrounds, fencing and getting the water balanced.
Looking after it
What ownership looks like the year after
On handover day we walk you through the whole pool — the equipment, the water and what the first week looks like — so it is familiar before we leave. After that it is ordinary care: chemistry in range, the filter looked after, and the pool stays the way it did when we handed it over.
Read the pool warranty Pool maintenance tips Landscaping around a pool
The rest of the region
Pool ideas for the rest of Canterbury
Tom O’Connell and Zach is the local pool builder and installer for Christchurch and the wider Canterbury region, so these pages sit alongside yours rather than instead of it. The team that would quote a Lincoln pool is the one on the Christchurch page.
Questions
Lincoln pool questions, answered
Are in-ground pools in Lincoln expensive?
It depends on the model, the size, how easily the shell reaches your section, and what you put around the pool — those four things move the number more than anything else. We do not quote a figure without seeing the site, because a wrong number wastes your time and ours. The pool cost guide carries the bands our own written quotes run across; your installer writes the actual price for your section. Send us your section and you will get a written quote for it.
How big a pool fits in Lincoln?
That is a question about your section, not about Lincoln in general — the clear space is what decides it. The fibreglass swimming pool range starts at the 3.6 x 2.2 m Tranquil plunge pool and runs to the 12 x 4.4 m Big Bertha, with ten models in between. A tight section usually ends up at a plunge or compact model; a section with room usually takes a 7 to 8 metre family pool. Worth remembering that our sizes are internal, water-line measurements, so an 8 x 4 pool gives you 8 x 4 of water, and the shell needs a little more space than that.
Is a building consent required for a pool in Lincoln?
Pool fencing is the part that is not optional. It has to comply with the building code, and it is checked — that applies to any pool in Lincoln, whether the pool itself needed a consent or not. Depending on the section, a resource or building consent may also come into it. We work through that as part of the job rather than leaving you to work it out, and the fencing sits outside the pool price, so ask for it to be shown on the quote.
How long does a pool installation take?
The excavation and the shell placement are the quick part — usually a few days once the team is on site. What takes the time is what comes after: filling, surrounds, fencing and getting the water balanced. You get a realistic sequence up front rather than just the fast part, so you can plan the garden and the fencing around it.
What is the most popular Bayside pool in Lincoln?
It follows the sections rather than the postcode. Where space is tight, the plunge and compact models win — the Tranquil, the Pause and the Element. Where there is room, a 7 to 8 metre family pool is the usual pick, which is the Retreat, the Cove or the Satin. The whole range with its dimensions is on the pool range page if you want to see the sizes side by side before you ring anyone.
Do you cover Lincoln?
We manufacture, and a licensed local pool builder and installer puts the pool in. For this region that is Tom O’Connell and Zach, covering Christchurch and the wider Canterbury region. Every Bayside shell is moulded in our Whakatāne factory and installed on site by the installer who covers your area, and the person who quotes your job is the person on your site when it goes in.
Are fibreglass pools in-ground pools?
Yes — a Bayside shell is designed to be set into the ground, so an in-ground pool is the standard case rather than a special order. The range also includes a Freestanding option for a section where digging is not wanted; it is the same shell family, sitting above ground.
How does a fibreglass shell compare with other pool types?
The shell arrives as one finished piece rather than being built up on site, so the on-site work is preparing the base, placing and setting it, and everything around the water. That is also why the surface matters so much: ours is ChlorShield, the gelcoat system on every Bayside shell, and the ChlorShield page sets out what it is built to do. We will talk about any pool type with you — we just sell the one we manufacture.
What colours do fibreglass pools come in?
There is a full palette on the pool colours page, shown on real pools rather than as swatches on a screen — which is the only honest way to choose one. You can also ask to see the colour in person before the shell is ordered.
Thinking about a pool in Lincoln?
Tell us where the pool is going and we will put the models and sizes that fit in front of you, with a written price.